Категория
паровой инжектор
Приложения
Паровая пескоструйная обработка (также известная как мокрая пескоструйная обработка) удаляет покрытия, загрязняющие вещества, коррозию и остатки твердых поверхностей. Это похоже на сухую пескоструйную среду, за исключением влажной пескоструйной среды.
До столкновения с поверхностью. Основным преимуществом паровой пескоструйной обработки по сравнению с пескоструйной обработкой является то, что она уменьшает пыль и позволяет оператору работать в различных условиях, минимизируя затраты на настройку и очистку. Он может производить более чистые, более последовательные готовые продукты, то есть наносить как можно больше, без встроенных частиц или прикрепленной пыли.
Примечания
Vapor Abrasive Blasters also use a mixture of water and media within the blast pot. The delivery of this mix is what differentiates the two. Vapor Blasters use water pressure within the pot to force the mix out and into the blast hose where it is then carried out to the nozzle by air pressure. Vapor Blasters can be used at lower pressures since the water pressure is what is forcing the mix out of the pot. However, you still need to be mindful of your initial mix of media and water, and not to mention what you do with any unused media and water within the pot when the job is complete.
Benefits
Small and portable – makes it easy to move on the deck. It can handle both horizontal and vertical surfaces
Environmental friendly – 92% less dust and less media consumption compared to dry blasting. Uses less water than traditional water-based wet blasting, pressure washing or hydro jetting
No health risks – No risks due to vibrations caused by hand tools
Surface preparation – perfect feathering which creates a good adhesion of the paint, compatible with almost all grit types
Model | TSW-225 (movable) | TSW-500 (movable) | TSW-800 |
Tank Diameter | Ø225mm | Ø500mm | Ø800mm |
Tank Height | 1250mm | 1350mm | 1550mm |
Tank Volume | 55L | 140L | 330L |
Add Water | 10gal / 37.85L | 20gal / 75.7L | 30gal / 113.4L |
Add Abrasive | 100Lbs / 45.36KG | 200Lbs / 90.72KG | 300Lbs / 136KG |
Continuous Blasting | 30mins | 60mins | 90mins |
Weight | ~125kg | ~190kg | ~250kg |
Working Pressure | 0.4~0.7MPa | 0.4~0.7MPa | 0.4~0.7MPa |
Blast Gun | 1pc | 1pc | 1pc |
Nozzle | Boron Carbide 10mm | Boron Carbide 10mm | Boron Carbide 11mm |
Blasting Hose | ID 1’’, length 50’ | ID 1’’, length 50’ | ID 1’’, length 50’ |
Control Method | Pneumatic Control | Pneumatic Control | Pneumatic Control |
Compressed Air Consumption | 185+CFM / 5.24m3/min | 185+CFM / 5.24m3/min | 210+ CFM / 5.95 m³/min |
Air hose | Blue; DN25 | Blue; DN25 | Blue; DN25 |
Abrasive Type | sand/glass bead | sand/glass bead | sand/glass bead |
Warranty | 1 year | 1 year | 1 year |